Hebei Dongguang Packing Machinery Co.,Ltd
Quality First, Honesty Important.
Add to Cart
| Name | 3 Layers | 5 Layers | 7 Layers |
| Hydraulic mill roll stand | 3 sets | 5 sets | 7 sets |
| Track trolley | 6 sets | 10 sets | 14 sets |
| Select hydraulic paper trolley | Select hydraulic paper trolley | Select hydraulic paper trolley | |
| Pre-heater | 2 sets | 4 sets | 6 sets |
| Single corrugate facer | 1 set | 2 sets | 3 sets |
| Multiple Pre-heater | 1set double pre-heater | 2sets triplex pre-heater | 1sets quadruple pre-heater |
| Bridge | Single bridge | Double bridge | Triplex bridge |
| Gluing machine | Gluing machine | Duplex gluing machine | Triplex gluing machine |
| Double facer | 1 set | 1 set | 1 set |
| Slitter scorer machine | 1 set | 1 set | 1 set |
| Optional two | Optional two | Optional two | |
| NC cutting machine | 1 set | 1 set | 1 set |
| Optional two | Optional two | Optional two | |
| Stacker | 1 set | 1 set | 1 set |
| Splicer | 3 sets | 5 sets | 7 sets |
Drive type: Electric/Pneumatic/Hydraulic
Voltage: determined according to client’s voltage
Working width: 1400-2500mm
Use for (3/5/7 ply)
Usage: purchased the corrugated raw paper and board put into the workshop,forklift is transported to the trolley in front of the paperless frame on the production line,and the paper feeding trolley is respectively used as the box plate paper of the face paper, the sandwich corrugated base paper is sent to the paper holder chuck.The face paper and the interlayer paper are preheated by the preheater on the production line and entered into the single facer,the corrugated raw paper is glued and bonded with the sandwich paper and then the corrugated paper is formed into a single-side corrugated paper.It is transported to bridge, preheated by (duplex preheater), in one-sided gluing machine glued then into the adhesive drying.The inner paper overlaps with the single corrugated paper through the preheater fed into the drying channel, and the gelatinized glue is bonded to the inner paper by heat, which is formed into 2/3/5/7ply of cardboard after setting and drying, and then trimmed and pressed lines by sliitter scorer. NC cutting for transverse cutting,it can be shaped into a specified size box board stacking pile up and standby.